Technical Support - Aegis Padlock DT Guia De Inicio Rapido

Ocultar thumbs

página de 10

/ 10
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

Adding a New User PIN (cont'd)

CREATING FORCED ENROLLMENT STATE ALLOWING USER TO GENERATE USER PIN

Note: This can only be done if there isn't already a User PIN established on the key using the method above.

1. Enter the Admin Mode by holding

press the

button. The

2. Press 0 + 1 and the

3. Press the

button to return the key to its locked state. The key is now in User Forced Enrollment State,

allowing a User to establish his own User PIN.

USER-GENERATED USER PIN IN FORCED ENROLLMENT STATE

1. Press

and ensure that the

+ 1 and ensure that the

2. Press

the new User PIN and press the

BLUE

joined by the

3. Within 30 seconds, enter that same User PIN once more, and press the

LED will glow solidly for a few seconds, then the drive will return to its locked state, indicated by the

LED glowing solidly. The key's data can now be accessed using either the User PIN or the Admin PIN.

Locking the Padlock DT

To lock the key, simply press the

If data is still being written to the Padlock DT, it will wait for this operation to be completed before the locking

operation takes place. The

Note: The Aegis Padlock DT will not be recognized by any operating system in its locked state.

Unlocking the Padlock DT

1. Beginning in standby mode, press the

2. Enter either an Admin PIN or User PIN and press the

(If the PIN is accepted, the

it's plugged into a USB port, after which will then glow solidly;

If the PIN is incorrect, the

Upon correct PIN entry, the key will be unlocked and ready for use. If it is not plugged into a USB port

within 30 seconds, the key will return to sleep mode and automatically lock itself.

Formatting For Mac OS

For the Mac OS, you must first reformat the drive to a Mac compatible file system

1. Connect drive to USB port and unlock using the Admin PIN.

2. Open the Mac Disk Utility from Applications/Utilities/Disk Utilities.

3. Select the Aegis Fortress from the list of drives and volumes.

4. Click the 'Erase' tab.

5. Enter a name for the drive. The default name is Untitled.

6. Select a volume format to use. The Volume Format dropdown menu lists the available

drive formats that the Mac supports. The recommended format type is 'Mac OS Extended

(Journaled).'

7. Click the 'Erase' button. Disk Utility will

unmount the volume from the desktop,

erase it, and then remount it on

the desktop.

Remember to save your password(s) in a safe place. For advanced feature setup info, refer to the complete user's

manual loaded on your Aegis Padlock DT drive and is also available on Apricorn's website: apricorn.com/support

12191 Kirkham Road, Poway, CA, U.S.A. 92064

+ 0 for five seconds; With

BLUE

LED will glow solidly.

GREEN

LED will blink three times, then will be replaced by

BLUE

and the

BLUE

LED continues glowing solidly while the

button. The

LED glowing solidly.

button. When locked, the

button can also be used to exit out of the Admin mode.

button to wake the drive. (The

GREEN

LED will quickly blink four times, then continue to blink slowly until

RED

LED will blink three times and then glow solidly.)

RED

LED blinking, enter the Admin PIN and

GREEN

LEDs are glowing solidly.

GREEN

LED will blink three times by itself and then will be

RED

button.