Publicidad
Premium single sided Fireplaces
installation
6. Apply surrounding gyprock/dry wall panels. Fix steel end beads on
all 4 edges (mitre the corners).
6
7. Plaster all seams and beads then paint to
create the finished wall appearance.
9. Install the Static wind Screen using the
spigots and washers provided.
7
8
ASSEMBLE GYPROCK WALL
PLANES.
9
Caution: Leave a 25mm [1in] trim around the appliance to permit
installation of the accompanying wind screens.
8. Place the burner into position (use leveling screws in the
corner of the tray to achieve a level setting).
10
oPerate aCCordinG to tHe BUrner oPerations ManUal
inClUded WitH tHe BUrner.
© Copyright 2004 - 2019 The Fire Company Pty Ltd. All rights reserved. V0119
25mm
INSTALL FRONT GLASS
SCREEN
ALLOW 25MM STAINLESS ST
EDGE.
25mm
INSTALL GLASS HOLDER
SPIGOTS TO FIREBOX.
ALIGN ALL WASHERS AND
INSTALL GLASS BETWEEN
THEM.
ALLOW 25MM STAINLESS ST
EDGE ON BACK FLANGE ALS
PLASTER ALL SEAMS AND B
Publicidad
