Aiphone JKW-BA Manual De Instalación página 4

4-3 Wiring distance
JK-DA JKW-BA
A
JK-DV
JK-DVF
JK-DA
JKW-BA
A
JK-DV
JK-DVF
Ø 0.65 mm
A 100 m
B 50 m
C 50 m
D 5 m
Connect each of the connecting units with a wiring distance within the values listed in the table above.
If units are connected with wiring distances outside of these ranges, this will adversely affect picture quality.
5
SPECIFICATIONS
• Power:
DC 18 V
• Current consumption: (Max.) 95 mA
• Operating temperature: 0 °C to 40 °C (+32 °F to +104 °F)
Aiphone warrants thats its products have no material or workmanship defects under normal use conditions for two years after delivery to the end user. Aiphone will perform repair
or replacement free of charge if the product is defective and the warranty applies to the defect. Aiphone reserves unto itself the sole right to make the final decision whether there is
a defect in materials and/or workmanship and whether or not the product is under warranty. This warranty shall not apply to any Aiphone product which has been subject to misuse,
neglect, accident, or to use in violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This warranty does not cover
batteries or damage caused by batteries used in connection with the unit. This warranty only includes carry-in repairs. Any repairs must be made at the shop or place designated in
writing by Aiphone. Aiphone will not be responsible for any costs incurred during on-site service calls. Aiphone will not provide compensation for any loss or damage incurred by
the breakdown or malfunction of its products during use, or for any consequent inconvenience or losses that may result.
The object area of is the EU.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:・Reorient or relocate the receiving antenna・Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. Increase the separation between the equipment and receiver.・Consult the dealer or an experienced radio/TV technician for help.
JK-1MED
B
JK-1MD
D
C
PS18
B
JK-1MED
JK-1HD
JK-1MD
D
C
PS18
22 AWG Ø 1.0 mm
330' 200 m
165' 100 m
165' 100 m
16' 10 m
Warranty
JK-1SD
18 AWG
650'
330'
330'
33'
• Dimensions: 109 (H) x 123 (W) x 61 (D) (mm)
4-1/4 (H) x 4-3/16 (W) x 2-3/8 (D) (inches)
• Weight:
Approx. 230 g (0.51 lbs.)
- 4 -