Connecting The Receiver - Conceptronic CVIDEOS2 Guía De Instalación Rápida

ENGLISH
3. Connecting your Wireless Audio/Video Sender
3.1 Connecting the Sender
A. Connect the Sender to the source device.
This can be a DVD/VCR Player, a Set-Top Box or Computer.
When you connect the Sender to a DVD/VCR Player or
Set-Top Box, use the RCA to Scart cable with the
"Sender" Label.
When you connect the Sender to a Computer with
composite TV-Output, use the RCA to Composite &
Audio cable.
B. Connect the Powersupply to the Sender and a free AC wall outlet.
C. Connect the IR Extension cable to the Sender and place the IR device in front of the
IR receiver of your source device.
D. Turn on your source device and the Sender. The Power LED on the sender will turn
on.

3.2 Connecting the Receiver

A. Connect the Receiver to your display device (TV, LCD, Monitor, etc.)
Use the RCA to Scart cable with the "Receiver" Label.
B. Connect the Powersupply to the Receiver and a free AC
wall outlet.
C. Turn on your television and the Receiver. The Power LED on the receiver will turn on.
D. Tune your television to the correct AV channel which corresponds with the used Scart
connection on the back of your television.
The image of your source device will be shown on the television.
If you connected the IR Extension Cable to the Sender and placed it in front of your source
device, you can use the remote control of the source device to operate it through the
Wireless Audio/Video Sender.
Enjoy the use of the Conceptronic Wireless Audio/Video Sender !
10
SENDER
RECEIVER