Menu Functions - Avermedia AverVision110 Manual Del Usuario

M e n u F u n c t i o n s
M e n u F u n c t i o n s
A V e r V i s i o n 1 1 0 has a MENU that allows you to access functions for fine-tuning your screen display. Press the MENU
A V e r V i s i o n 1 1 0
button to call up and exit from the main menu or sub-menu display. Then use ▲or▼ buttons to select the items in the
menu list. Use ► button to enter sub-menu. To adjust the setting, press ◄or► buttons.
Main Menu On Screen Display
BRIGHTNESS
EXPOSURE
WB
CONTROL
(White
Balance)
E-10
Description
Press ►or◄ buttons to increase or decrease the brightness
level and improve the image visibility. The brightness level can
be adjusted from 1 to 16.
Use ▲or▼ buttons to select between Auto or Manual and then
press ► to make the selection.
AVerVision110 allows you to automatically or manually adjust the
CCD camera to determine how much light is required.
If you choose to manually adjust the exposure, press ►or◄
buttons to adjust the exposure level. The exposure level can be
adjusted from 1 to 8.
This feature will be automatically set to auto when the Backlight is
turned on.
Use ▲or▼ buttons to select between Auto or Manual and then
press ► to make the selection.
AVerVision110 allows you to automatically or manually adjust the
CCD camera to suit the lighting condition or color temperature. If
you select to manually adjust the white balance, you can adjust the
Red, Blue or let the system measure the color temperature. The
Red and Blue color temperature can be adjusted from 1 to 256.
To obtain a more accurate color balance, place a sheet of white
paper under the camera. Select MEASURE, then press ► button to
calibrate the color temperature. The word "ON" will blink, then wait
until it stops and the word "OFF" will appear.
This feature will not be available when you are in B/W mode.