DeLonghi DTT312 Instrucciones Para El Uso página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

up.
9 Use the carriage lever to raise the food item.
10 After use, unplug the toaster.
USING THE TONGS
-
Unplug the toaster, use the carriage lever to raise the food item and use the tongs to assist
with the removal of particularly small items such as English muffins or crumpets.
CAUTION: Avoid touching the metal parts with the tongs.
TO TOAST FOOD ITEMS USING THE SANDWICH CAGE
-
Thoroughly cook or re-heat ingredients such as meat or fish prior to adding them to the
sandwich and ensure all ingredients are piping hot throughout before serving. Do not
re-heat ingredients more than once.
-
Do not leave hot ingredients to cool before toasting the food item.
-
Ensure all ingredients particularly meat or fish are fresh and used within use-by dates.
-
Use other vegetable ingredients at room temperature to avoid them chilling the hot
cooked ingredients.
-
When cutting your panini or ciabattas etc do not cut all the way through, instead leave the
bottom side uncut so that it prevents melted cheese from dripping into the toaster.
-
Cut ingredients thinly - do not use large chunks.
-
Take care when using ingredients that could melt and run out of the food item. We do not
recommend the use of high fat or similar fillings that may drip into the toaster as this will
be difficult to clean.
-
Lightly butter the outside surface of sandwiches and place the
filling in between the unbuttered sides. This helps prevent the
outside from burning. Do not use low fat spreads, which are
not suitable for toasting.
-
Ensure the food item is evenly filled.
-
Always use food items that are a suitable size for the sandwich
cage. Do not force food items into the toaster.
1 Plug the toaster into the power outlet, an audible beep will be
heard.
2 Place the food item in the sandwich cage and close.
3 Adjust the slot width to suit the sandwich cage. CAUTION: Take
care not to touch the adjustable heating panel, it may be hot.
4 Lower the carriage lever and place the sandwich cage into the
slot with the handle pointing to the opposite end to the controls
(Fig 3).
5 Move the browning control to the desired setting.
6 It is recommended to use the low power setting. The selected
button and cancel button lights will illuminate, an audible beep will be heard and
toasting will begin.
-
In order to monitor the progress of the toasting, the sandwich cage can be lifted up without
cancelling.
7 To stop toasting at any stage, press the cancel button. The toaster will emit an audible
beep to indicate toasting is cancelled and the button lights will go out.
8 When toasting is nearly finished the toaster will emit an audible beep and after a slight delay
the button lights will go out and the toasting will stop. The food item will NOT pop up.
9 Leave the toasted food item to stand for 1 minute inside the toaster before serving.
10 Remove the sandwich cage then open it up and tip the food item onto a plate.
11 After using, unplug the toaster.
Fig.3
5

Publicidad

Tabla de contenido
loading

Tabla de contenido