Technical Specifications; Battery Operation - Sunoptic Technologies SSL-2054BE Manual De Usuario

3.

TECHNICAL SPECIFICATIONS

Input
Output
Operating Temperature
Storage Temperature
Contacts
Dimension (without battery adaptor)
Weight (without battery adaptor)
Regulatory Approvals
Water Resistant
4.

BATTERY OPERATION

FUEL GAUGE: Each SSL-2054BE battery is equipped with a fuel gauge that displays
the relative charge state of the battery. To activate the fuel gauge, press the small
circular button next to the gauge. Each LED on the fuel gauge represents 25% of the
fully charged capacity. Below is the fuel gauge legend:
•
All four LEDs illuminated – Capacity = 76 – 100%
•
Three LEDs illuminated – Capacity = 51 – 75%
•
Two LEDs illuminated – Capacity = 26 – 50%
•
One LED illuminated – Capacity = 10 – 25%
•
One blinking LED – Capacity < 10%
CHARGING: The SSL-2054BE should only be charged with Sunoptic Technologies
supplied smart battery chargers. To charge, orient the battery to line up the charger and
LIT-234 Sunoptic Technologies
Rev. A
Item
Figure 1. The SSL-2054BE Battery
®
Page 4 of 30
Specification
17.4V 2.17A max
15V 3.2A nominal, 4.25A max.
32 ⁰ F to 113 ⁰ F (0 ⁰ C to 45 ⁰ C) while charging
-4⁰F to 140⁰F (-20⁰C to 60⁰C) while
discharging
-4 ⁰ F to 140 ⁰ F (-20 ⁰ C to 60 ⁰ C) max.
-20⁰F to 25⁰F (-20⁰C to 77⁰C)
recommended
+, C, D, T, -
(LxWxH) 3.4in x 3.0in x 0.9in
0.53lbs
UL listed, UN 38.3 and CE
Not Protected Equipment, IPX0
(English)