Warning Signal; Going To Sleep - Optoma Pi500 Manual Del Usuario

Warning Signal

Sometimes you probably will see the warning messages from this LCD screen.
This means that the LCD display cannot exactly receive the signal from the com-
puter graphic card.
There are three kind of situations may happen.Please check with the connected
cables or contact your local dealer for more information.
4
No Signal
This message means that the LCD display has been powered on but it cannot
receive any signal from the computer graphic card. Check all the power switches,
power cables, and VGA signal cable.
4

Going to Sleep

This message means that the LCD display is under the power saving mode. In
addition, the LCD display will go to this sleeping mode when experiencing a
sudden signal disconnecting problem.
4
Unsupport Mode
This message means that the signal of the computer graphic card is not
compatible with the LCD display. When the signal is not included in the
compatibility mode we have listed in the Appendices of this manual, the
LCD display will appear this message.
E n g l i s h
15