Alcad PS PROGRAMMER Manual De Instalación Y Programación página 15

14 - ENG Installation and programming manual
www.alcad.net
If you do not have a connection to the Internet, feel free to request the
updating software from your local Alcad Dealer or Representative or from
Alcad.
Updating the programmer is done with a PC. To connect the PS
programmer to the PC, you will need a communications cable CU-001
(Cod. 9120003).
WARNING: The communications cable has to be connected to serial
port COM1 or COM2 of the PC. Connecting the cable to the computer's
USB will not permit any attempt to update the PS programmer.