Bultaco BRINCO Guía Rápida página 14

KNOW YOUR BRINCO / HANDLEBAR CONTROLS
Dashboard
Rear brake
handle
Power
Control
Button
Allows you to select
and maintain the
Shifter
same power level
during your ride.
WARNING
IDENTIFY THE CORRECT POSITIONING OF THE BRAKES.
The front brake lever is on the right handlebar grip. The rear brake lever is
on the left handlebar grip.
Always make sure before switching ON your Brinco, that the accelerator
returns correctly to its position when you release it after accelerating.
Take great care while using the POWER CONTROL button.
ALWAYS check that the vehicle is turned o after every use. Stop button
in OFF position.
The model represented corresponds to Bultaco Brinco S.
Front brake
Horn
lever
control
Throttle
control
Stop button
Activates/deactivates
the throttle control.
Pressed = OFF
Unpressed = ON
WARNING INDICATOR.
Flashing light: keep driving and enjoy your
Brinco. The self-protection system will
regulate the power delivery to decrease
your Brinco's demand level.
Continuous light: the vehicle will stop.
Check the User Manual for the full list of
warning signs.
Specific element for homologated version.
Battery level
Speedometer
In-Use Indicator Light
Low Battery
Indicator
Warning Indicator Light
WARNING
To improve battery life as much as possible and
optimise its performance, recharge the battery after
every use.
To the right of the Driving Mode you will find the
instant power value in W.
Whenever the dashboard is illuminated your Brinco
will be on, but it will only be in running condition
when stop button is ON.
Driving mode
NFC Antenna to lock / unlock
your Brinco
Odometer/ Trip
SET Function
Sets the odometer to 0.
MODE Function
3 driving modes: Sport / Tour / Eco
Press and hold for 4 seconds to change: ODO – TRIP1 – TRIP2
INFO