Attaching The Fan Blades - PROGRESS LIGHTNING AirPro P250006 Manual De Instalación

Finishing the Fan
Installation
1.
Move fan into position over the mounting
bracket and secure with the 4 screws provided.
(Fig. 9)
2.
Raise the decorative ring up against the
mounting bracket, the four supports inside the
decorative ring should be placed against the
four studs on mounting bracket, twist the
decorative ring clockwise until snug (Fig. 10).
Mounting
Bracket
Decorative
Ring

Attaching the Fan Blades

1. Insert the blade through the slot in the blade
Screws
holder. Align the holes in the blade and the fan
blade holder and secure with a the screw and
fiber washer. (Fig. 11)
2. Tighten each screw securely starting with the
center screw. Make sure the blade is straight.
Repeat steps for the remaining blades.
Figure 9
WARNING:
PERSONAL INJURY, DO NOT BEND THE BLADE
WHILE INSTALLING, BALANCING THE BLADES,
OR CLEANING THE FAN. DO NO INSERT
Studs
FOREIGN OBJECTS BETWEEN ROTATING FAN
BLADES.
Figure 10
Screws
TO REDUCE THE RISK OF
Blade
Figure 11
6.