Chauvet DJ INTIMIDATOR SPOT 260 Guía De Referencia Rápida página 3

Idiomas disponibles

To Begin

Unpack your Intimidator Spot 260 and make sure you have received all parts in good condition. If the box or contents

appear damaged, notify the carrier immediately, not Chauvet.

AC Power

This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.

To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

Power Linking

For the maximum number of Intimidator Spot 260 products that you can power link at each voltage, see the User Manual

or the specification sticker on the product.

Fuse Replacement

Disconnect the product from power.

Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.

Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

Re-insert the fuse holder and reconnect power.

Mounting

Before mounting this product, read the

Mounting Diagram

Intimidator Spot 260 QRG Rev. 2

QUICK REFERENCE GUIDE

Safety

Notes.

Safety Cable

(such as CH-05 from

Chauvet)

Mounting Clamp

(such as CLP-15 from Chauvet)

Mounting Bracket

(Included)

Rubber Feet for

Floor Mounting

(x4)

Tabla de Contenido