Mounting Diagram - GE Evolve GEH-6014B Guia De Instalacion

6
STORAGE
• Prior to installation, units should NOT be stored
outside in corrugated boxes (cardboard boxes) alone.
• Until installation, all units should be placed in a
covered dry storage area. The storage area should
not exceed -40°C (-40°F) to 50°C (122°F).
- This can be preferably in a roofed area or with a
tarp that is secured in such a way to keep water
off of the corrugated boxes (cardboard boxes).

MOUNTING DIAGRAM

FIGURE 3
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in
connection with installation, operation or maintenance. Should further information be desired or should particular problems arise which are not
covered sufficiently for the purchaser's purposes, the matter should be referred to GE Lighting.
GE Lighting • 1-888-MY-GE-LED
GE Lighting is a subsidiary of the General Electric Company. Evolve and the GE brand and logo are trademarks of the General Electric Company.
© 2016 GE Lighting. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
7
OCCUPANCY SENSOR
(Optional on EWS2 and EWS3)
• The programmable occupancy sensor is shipped with
a default program which may be modified using the
WattStopper ®
(sold separately).
• www.gelighting.com
(1 - 888 - 69 - 43 - 533)
FSIR-100 wireless IR configuration tool
35-201578-206 (Rev 01/09/18)
English