KMP 42W 2-Port USB-C Manual De Instrucciones página 5

Instructions for using the device:
1. Select the appropriate adapter and attach to the charger by first folding the integrated US plug back and then sliding the relevant adapter onto the charger (see image).
2. Connect the charging cable to your device's charging connection.
3. Connect the other end with the appropriate USB output terminal of the charger.
4. Plug the charger into a wall socket.
5. Unplug the charger from the wall socket once the device is fully charged.
Technical data
Input: AC100-240V~50/60Hz 0,8A
USB-C Output (30W): 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 18V/1.5A, 20V/1.5A
USB-A Output (12W): 5V/2,4A
Output total: 42W
Safety technology
• Short Circuit Protection
• Over Current Protection
Safety instructions and warnings
• Keep out of reach of children!
• Do not connect other attachments to the device as extensions!
• Do not connect in series.
• Do not operate when covered!
• There is zero potential only when the plug is pulled out!
• Only use the device indoors in a dry place and at normal room temperature; keep the device away from moisture and do not allow to get wet.
• Do not use the product with damp or wet hands!
• The device is not meant for commercial use!
• No changes or modifications can be made to the product!
• Do not expose the device to extreme temperatures, extreme solar radiation, air humidity or moisture.
• Do not expose the device to extreme fluctuations in temperature. Only use the device if it is adjusted to the surrounding temperature.
• Do not use the device near strong magnetic fields, such as motors, transformers and the like.
• Do not stick any foreign objects into the device!
• Pull the plug from the socket when the device is not in use.
• If problems or interference are encountered when using the device, discontinue using and unplug the device. Contact the manufacturer.
• Never use the device if it displays any signs of fault, visible or not. In the event of any faults, stop using immediately.
• Never exceed the device's given input. Never attempt to operate the device with another voltage!
To comply with the published safety standards, the following must be observed when using this adapter.
• For information technology equipment and office use only.
• The output power taken from the supply must not exceed the rating given on the adaptor. The adaptor is not intended to be repaired by service personnel in case of failure or
component defect (unit can be thrown away).
• The connector of this power supply cannot be replaced; If the connector is damaged, the power supply should be scrapped.
• The disconnection from line voltage is made by pulling the mains plug.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
Please keep observed safety notes before use.
Other uses or changes to the device are not considered approriate and conceal significant risks of accidents. The manufacturer is not liable for any damages resulting from impro-
per use.
Disposal
Electrical devices cannot be disposed of with household waste!
In accordance with the European Guideline 2012 / 19 / EC about old electric and electronic appliances, used electrical equipment must be collected separately and
recycled in an environmentally friendly manner. You can learn more about the possibilities for disposing of worn-out devices from your local or city administration.
Written guarantee
1,5 year guarantee from the date of purchasing this product.
Please retain the receipt or invoice as proof of purchase.
Service address
KMP AG, Pfarrer-Findl-Straße 40, 84307 Eggenfelden, Germany
Service-Hotline: +49 (0) 180 20 20 800
(The charge for calls to 01802 numbers from the German fixed-line network is 6 ct/call, from the wireless German phone network max. 42 ct/minute. Phone charges for callers
from abroad may differ.)
www.kmp-lifestyle.com
Declaration of conformity
The CE symbol has been added in line with the regulations:
The LVD Directive 2014/35/EU
EN 60950-1: 2006+A11: 2009+A1: 2010+A12: 2011+A2: 2013
The EMC Directive 2014/30/EU
EN 55032: 2015, EN 55024: 2010+A1: 2015
EN 61000-3-2: 2014, EN 61000-3-3: 2013
"KMP CREATIVE LIFESTYLE PRODUCTS." is a registered trademark of KMP, Eggenfelden, Germany. "Apple", "iPhone", "iPad" and "MacBook" are trademarks of Apple Inc., Cupertino Calif., US. All trademarks
and registered trademarks are the property of their respective owners and are only used descriptively.
ES
Instrucciones de uso 42W 2-Port USB-C Charger
Familiarícese con el producto antes de su primera puesta en servicio.
Para ello, lea atentamente el siguiente manual de instrucciones y las indicaciones de seguridad. Utilice el dispositivo únicamente como se indica a continuación y para las aplica-
ciones indicadas. Conserve las presentes instrucciones.
Si transfiere el dispositivo a terceros, asegúrese de entregarles toda la documentación.
Instrucciones de uso del dispositivo:
1. Escoge el adaptador adecuado y conéctalo al cargador. Para ello, primero despliega el enchufe americano integrado y a continuación introduce el adaptador correspondiente en el
cargador (ver imagen).
2. Conecta el cable de carga al conector de carga de tu dispositivo.
3. Conecta el otro extremo a la conexión de salida USB adecuada del cargador.
4. Enchufa el cargador al enchufe de pared.
5. Cuando el dispositivo esté completamente cargado, extrae el cargador del enchufe de pared.