Installation Instruction - GRE 35L Manual De Instrucciones

EN
INSTALLATION
• Find a sunny outdoors location with easy access to the water supply and drains

• Installation instruction:

1. Fix the shower head to the shower body with 3 screws.
2. Connect the hose and tighten the hose clamp.
3. Fix the shower head cover with screws.
4. Fix the foot wash tap by rotating it clockwise.
5. Drill 4 holes of diameter 12mm and 40mm deep into the ground. Fix the solar shower vertically to the
ground with 4 screws (screw sizes: Ø10×30mm ).
• Connect the water supply. If necessary, use the connection adapter. Once the shower has been com-
pletely installed, turn shower handle to full on hot position (clockwise rotation) to allow the trapped
air to come out and enable the water to come in, until the solar shower is full of water.
• When the body of solar shower is full of water, a few drops will start coming through the shower
head. You can then turn the shower head off to allow the water to stay inside the solar shower. The
water inside will be heated using solar energy. The cold water can be used at any time.
SOLAR SHOWER INSTRUCTION