Care And Cleaning - Klipsch HD Theater 1000 Manual Del Usuario

CONNECTIONS
Conventional Connection – Using 20-16 gauge speaker wire,
connect the RED "positive" (+) terminal of the LEFT speaker to
the RED "positive" (+) terminal of your amplifier's LEFT
nel. Connect the BLACK "negative" (-) terminal of the LEFT
speaker to the BLACK "negative" (-) terminal of your amplifier's
LEFT channel. Repeat this procedure for connecting all remain-
ing speakers to the appropriate amplifier channels. Refer to
Figure 4. Make sure no bare wires from any of the connections
touch any other bare wires or terminals as this could cause a
short and damage your equipment.
Amplifier Requirements – Klipsch speakers are
highly efficient and will work well with a wide variety
of amplifiers. Due to the high output levels Klipsch speakers are
capable of reproducing, exercise caution with the volume control.
Excessive volume over long periods of time can permanently
damage your hearing. Overdriving your amplifier could also
damage your speakers. Check with your dealer to make sure
your particular amplifier is best suited to your application.We want you
listening for a lifetime.
NOTE: The A/V receiver/surround sound processor must be set
to "Subwoofer On" and all speakers set to "small".
The suggested crossover point is 150 Hz. If 150 Hz is not avail-
able, use 120 Hz.

CARE AND CLEANING

Your speakers have a durable finish that should only require dry
dusting. Avoid use of abrasive or solvent-based cleaners and
harsh detergents. The brush attachment of your vacuum or a
damp cloth should remove any dust from your speaker grilles.
WARRANTY—U.S. AND CANADA ONLY
Klipsch warrants to the original retail purchaser that this product
is to be free from defective materials and workmanship for a
period of five (5) years, from the date of purchase, if it is proper-
ly used and maintained.If this product proves defective in either
material or workmanship, Klipsch, at its option, will (a) repair the
product, or (b) replace the product, at no charge for parts or
labor. If the product model is no longer available and cannot be
repaired effectively or replaced with an identical model, Klipsch
at its sole option may replace the unit with a current model of
equal or greater value. In some cases, modification to the
mounting surface may be required where a new model is substi-
tuted. Klipsch assumes no responsibility or liability for such mod-
ification. To obtain a repair or replacement under the terms of
this warranty, please return to dealer first, if possible, and they
will direct you accordingly for repairs or replacement. You will be
required to submit a copy of the original receipt.
Limitations:
• This limited warranty does not cover failure of the product
resulting from improper installation, misuse, abuse, accident,
neglect, mishandling, or wear from ordinary use or
environmental deterioration.
• This limited warranty does not cover cosmetic damage,
including paint damage, or consequential damage to other
components or premises which may result for any reason
from the failure of the product.
• This limited warranty is null and void for products not used in
accordance with Klipsch's instructions.
chan-
• This limited warranty is null and void for products with altered
or missing serial numbers and for products not purchased
from an authorized dealer.
• This limited warranty terminates if you sell or otherwise
transfer this product to another party.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE, JURISDICTION TO JURISDICTION OR COUNTRY TO COUN-
TRY.KLIPSCH'S RESPONSIBILITY FOR MALFUNCTIONS AND
DEFECTSIN HARDWARE IS LIMITED TO REPLACEMENT OR
REPAIR AS SETFORTH IN THIS WARRANTY STATEMENT. FOR
CANADIAN CUSTOMERS, KLIPSCH DISCLAIMS ALL OTHER WAR-
RANTIES AND CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, FOR THE PRODUCT. FOR U.S. CUSTOMERS, ALL
EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE LIMITED IN TIME TO THE TERM OF THIS WARRANTY. SOME
STATES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW THE
EXCLUSION OF CERTAIN IMPLIED WARRANTIES OR CONDITIONS,
OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR
CONDITIONS LASTS, SO THIS LIMITATION MAY NOT APPLY TO
YOU. KLIPSCH DOES NOT ACCEPT LIABILITY FOR SPECIAL, INDI-
RECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING
WITHOUT LIMITATION, ANY LIABILITY FOR THIRD PARTY CLAIMS
AGAINST YOU FOR DAMAGES OR FOR PRODUCTS NOT BEING
AVAILABLE FOR USE. THE MAXIMUM LIABILITY FOR WHICH KLIP-
SCH MAY BE RESPONSIBLE WILL BE NO MORE THAN THE
AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT
OF THE CLAIM. SOME STATES, JURISDICTIONS OR COUNTRIES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Warranty Outside the U.S. and Canada
The Warranty on this product if it is sold to a consumer outside
of the United States and Canada shall comply with applicable
law. To obtain any applicable warranty service, please contact the
dealer from which you purchased this product, or the distributor
that supplied this product.
EU Compliance Information
Eligible to bear the CE mark, Conforms to European Union Low
Voltage Directive 73/23/EEC and 2006/95/EC; Conforms to
European Union EMC Directives 89/336/EEC and 2004/108/EC.
WEEE Notice
Note: This mark applies only to countries within the European
Union (EU) and Norway.
This application is labeled in accordance with
European Directive 2002/96/EC concerning waste
electrical and electronic equipment (WEEE). This
label indicates that this product should not be dis-
posed of with household waste. It should be
deposited at an appropriate facility to enable
recovery and recycling