Descaling; Troubleshooting - QOOL 2.0 Dosing Instrucciones Para El Uso

DESCALING

In order to keep your coffee machine working efficiently you must regularly clean the
mineral deposits (scale) produced by the water. You must bear in mind the water quality
(hard or soft water) in your usage area and how frequently the equipment is used.
You are recommended to carry out equipment descaling every three months, or after
approximately 200 Delta Q capsule extractions.
Follow the safety instructions shown on the Delta Q descaling kit packaging.
Avoid contact of the descaling solution with eyes, skin, machine and surrounding surfaces.

TROUBLESHOOTING

PROBLEM
• Equipment won't start.
• The coffee is too cold.
• Coffee is not being
dispensed or it is being
produced too slowly.
If the machine is not working properly make the simple checks set out below.
If the problem is not among those listed or if it still persists, even if you follow the advice
given, contact our Customer Service and Support 00 800 20 50 20 50 to resolve the
problem of the machine.
58
POSSIBLE CAUSE
• Not properly plugged
into the power socket.
• The machine is not
ready.
• Not enough water in the
tank.
POSSIBLE SOLUTION
• Make sure it is properly
plugged in (9).
• Wait until the correct
temperature is reached,
shown by the indicator
lights (11, 12 and 14).
• Make sure that there
is sufficient water in the
tank and, if necessary, fill
the tank (2) with water.