SKS 5020WH-NA / SKS 5021GR-NA / SKS 5022BL-NA / SKS 5023OR-NA / SKS 5024RD-NA / SKS 5025VT-NA / SKS 5026YL-NA / SKS 5027TQ-NA / SKS 5028RS-NA
INSTRUCTIONS FOR USE
Turning the scale on and off
Warning
Before turning on the scale for the fi rst time, please check the back of the battery cover and
remove the insulation tape, which prevents the discharge of batteries during transport.
1)
Turn the scale on by pressing the "ON/OFF TARE" button.
2)
Turn the scale off by pressing the "ON/OFF TARE" button.
Warning
The scale turns itself off automatically after approximately 60 seconds after displaying "0.0" on
the LCD display or while it is idle. By turning it off after weighing using the "ON/OFF TARE" button
you will save the battery.
Switching units
While weighing you may switch between units (g -> ml -> lb:oz -> fl .oz) by pressing the "UNIT" button.
Weighing procedure
1)
Turn the scale on by pressing the "ON/OFF TARE" button.
2)
If necessary select the weight unit (g -> ml -> lb:oz -> fl .oz).
3)
Place the food that you wish to weigh on the weighing surface.
4)
The weight will be displayed on the display in the selected units.
Additional weighing function
1)
Turn the scale on by pressing the "ON/OFF TARE" button.
2)
If necessary select the weight unit (g -> ml -> lb:oz -> fl .oz).
3)
Place the food that you wish to weigh carefully on the plate.
4)
As soon as the scale stabilises, press the "ON/OFF TARE" button. The current weight will be erased
and the display will be reset to zero.
5)
Place other foods on the scale. The display will display only the weight of the newly placed foods.
6)
In this way you may continue to weigh additional foods by adding them step by step and repeating
steps 4 and 5.
How to turn off the additional weighing function (TARE)
Remove all food from the scale. A negative value will be displayed on the display. Press the "ON/OFF
TARE" button to reset the scale to zero.
Copyright © 2014, Fast ČR, a.s.
Kitchen scale
EN-5
Revision 10/2014