Vasco WRX Instrucciones De Uso Y De Montaje página 58

EN – Function/Operation
2.3.2 Change setpoint temperature
Fig. 5: Change setpoint temperature
Room temperature
manually with
7 °C – 27 °C. Confi rm by pressing
ternatively you can tap directly on the tem-
perature on the homescreen. The controller
changes to manual operation: the manual
setting remains active until the next program
block. This is shown on the homescreen with
.
14
Controller WRX
can be set
+/- key from
. Al-
2.3.3 Boost
Fig. 6: Boost
Boost: heating at full output over a fi xed pe-
riod of time
1 Target temperature
2 Remaining run time Boost
3 Cancel
2.3.4 Display time program
Fig. 7: Display time program
Display the current program.
1
2
3
05/2019