Safety Instructions; Parts Description; Before The First Use - Kiwi KSI 6463 Manual Del Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12

SAFETY INSTRUCTIONS

• By ignoring the safety instructions the manufacturer can not be hold responsible for the
damage.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• Never move the appliance by pulling the cord and make sure the cord can not become
entangled.
• The appliance must be placed on a stable, level surface.
• The user must not leave the device unattended while it is connected to the supply.
• This appliance is only to be used for household purposes and only for the purpose it is made
for.
• This appliance shall not be used by children from children aged less than 8 years. This
appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord
out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be
made by children unless older than 8 and supervised.
• To protect yourself against an electric shock, do not immerse the cord, plug or appliance in
the water or any other liquid.
• Keep the appliance and its cord out of reach of children less than 8 years of age when it is
energized or cooling down.
• Do not left the iron unattended while it is connected to the mains supply.
• Do not open the waterreservoir during use.
• Do not use the iron when it's dropped, if there are visible signs of damage or if it is leaking.
• Make sure the iron will be used and rest on a stable surface.
• Remove the plug from the socket before the water reservoir will be filled with water.
Surface are liable to get hot during use.
• Only use the iron together with the provided stand.
• When you place the iron on its stand, make sure the surface where the stand is places is
stable

PARTS DESCRIPTION

1. Steam cable
2. Power cord with plug
3. Power on / heating light
4. Base
5. Thermostat knob
6. Steam button
7. Soleplate
AC220V-240V, 50Hz/60Hz, 2200W

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic
from the device.
• Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the
device matches the local voltage before connecting the device.)
• Place your steam generator on a stable, horizontal heat-resistant surface.
• Never use the steam generator when water tank is empty, refill it before use it again.
7
2
3
6
5
1
4
2

Publicidad

Tabla de contenido
loading

Tabla de contenido