Problems With Heat Transfer; Accessories; Mounting Brackets - Reflex RMB-31-100-P30 Manual De Instrucciones

Defects / Accessories
36
5.2.

Problems with heat transfer

If there are problems with heat transfer,
measure the temperature / flow rate on the inlet
and outlet of each medium. Then check the
measured value with regard to the amount of the
thermal energy transfer in accordance with the
specifications. If the heat transfer efficiency drop
below the specified values, clean the heat transfer
surface.

Accessories

The accessories are
not delivered with the
heat exchanger as
standard, they can
be ordered additionally.
6.1.

Mounting brackets

The brackets affix the heat exchanger to the
floor or structural elements of the system. They
are not delivered with the heat exchanger as
standard but can be ordered additionally.
Fig.8 presents how to affix the brackets to the
heat exchanger:
heat exchanger
1
front support
2
transport lug
3
rear support
4
nut M10
5
washer M10
6
EN PL PL