Getting Started; Activate The Monitor; Pairing The Camera And Monitor - Furrion Vision S FOS43TASK Manual De Instrucciones

Getting Started

The camera and monitor need to be paired
the first time you are using your Vision S
Camera System.
NOTE: Ensure both the camera and monitor
has power supplied during pairing and
setting processes. (The vehicle may need to be
running.)

Activate the Monitor

In off mode, press the
of the monitor to turn on the monitor. In on
mode, press and hold the
the monitor.
There are four options that allow you to set
the wireless vehicle rear observation system
before operating.
8
button on the right
button to activate

Pairing the Camera and Monitor

1. Use or button to highlight PAIRING
menu, then press
page.
2. Press the "MONITOR PAIRING" button at
the bottom of selected camera to pair.
to enter the next