Short Term Operation; Before First Use; Assembling; Operation - CASO DESIGN UZ 200 Manual Del Usuario

15.1 Short term operation

The device is intented only for short term opeation. Run the device in intervals of 30
seconds of operation, 1 minute cool down time, to avoid overheating. Otherwise the motor
could be damaged. After 3 intervalls let the device cool down for 30 minutes.

15.2 Before first use

Clean the base and the grinding container with a damp cloth.
Please note
► When using for the first time little smell occurs. This is harmless and disappears after a
while.

15.3 Assembling

15.4 Operation

Use the container with 2-fold blades for the grinding
and crushing of coffee beans, processing of nuts
(shelled),dry spices and herbs.
Use the container with 4-fold blades for processing
of nuts (shelled), wet spices & herbs and
preparation of pesto. Please add a teaspoon of
liquid (such as oil) when processing ingredients
with little moisture.
Fill in coffee beans, nuts (without shell) or spices in
the grinding container.
Do not fill beyond MAX-marking.
Place transparent lid on the grinding container.
Plug in the power cord.Place the cover over the grinding container with transparent lid.
To switch on press down the cover on the base (photo). A microswitch will be activated
and the motor will start the operation. Hold the device steady.
Place grinding container on the base and
turn clockwise until it latches.
The device will work only when it is
assembled correctly.
Fill coffee beans or food into grinding
container. Place transparent lid. Place
cover.
33