Furrion FCR10DCBTA-BL Manual De Instrucciones página 8

Installation
Fig. 2
2. Open the door of refrigerator. Fix the
bottom piece of the trim kit onto the
bottom of the refrigerator using 3
screws. (Fig. 3 )
Fig. 3
3. Put the refrigerator completely into
the enclosure and adjust the leveling
feet to make the refrigerator stand
level. (Fig. 4)
Fig. 4
7
4. Secure the refrigerator into the
enclosure using 4 self-tapping screws
(2 pieces each on top and bottom).
(Fig. 5 and Fig. 6)
Fig. 5
Fig. 6
5. Remove the protective film from the
trim strip and clip on top and bottom
of the refrigerator.
NOTE: Install the short one on top of
the refrigerator and the longer one at
the bottom. (Fig. 7 and Fig 8)
Fig. 7
r t e r
S h o
)
m m
( 5 9 4