Cisco Linksys WET610N Guía De Instalación Rápida página 8

English
O.
Configure the following:
Wireless Network Name
(SSID)
Enter the name of your
wireless network .
Authentication Type
the authentication used by your
wireless network .
Encryption Type
the encryption used by your
wireless network .
Security Key
Click Next .
NOTE:
may want to configure wireless security on your router if you
have not already done so .
P.
Please wait while the Setup Wizard connects the Bridge to your wireless
network . Warnings from your firewall or security application may
appear . If necessary, click Always allow or Allow this time only to
allow the wireless connection .
Q.
You will connect the Bridge
to the device that you want to
equip with wireless .
Click Next .
8
Select
Select
Enter the security key of your wireless network .
If you are connecting to your own wireless network, you
Wireless-N Ethernet Bridge with Dual-Band
WET610N