Common Operation - Furrion DV3300S-BL Manual De Instrucciones

Operation

Common Operation

Turn the unit on or switch to standby
mode
Press to turn the unit on or switch to
standby mode.
Select a source
1. Use on the front panel.
Press once or more to select Tuner,
Disc (after inserting a disc), USB (after
inserting a USB storage device), BT, ARC,
AV IN, or AUX mode.
Note: Press to enter Bluetooth mode
directly. Press again to return to the
current playback mode.
2. Use the corresponding buttons on the
remote control.
DVD / USB - Once a DVD or USB is
inserted into the unit, the unit will
automatically switch to the corresponding
source. If a disc has already been inserted
and the unit is playing from another
source, you can press DVD / USB to select
DVD.
AM / FM - Press and hold this button
on the remote control to scroll through
FM1, FM2, FM3, AM1, and AM2. To switch
between USA and Europe radio regions,
press and hold
5 seconds until the region is displayed on
the screen.
AUX/ARC - Press this button on the
remote control to scroll through the AUX /
ARC inputs available for the unit.
AUX - Connection on the front of the unit
(Audio input function).
HDMI OUT (ARC) - Connection on the
rear of the unit, used to connect a TV with
Audio Return Channel function. Make
sure the ARC function of the TV is on.
on the front panel for
* For details on setting and operating
your TV, refer to the instruction manual
for the TV.
About Audio Return Channel (ARC)
ARC allows audio signals to travel both
ways under HDMI Control. If you connect
a TV that supports HDMI Control and ARC
to the unit with a single HDMI cable, you
can output video/audio to the TV or input
TV audio to the unit.
In case noises are produced from the
speakers connected to the unit because
TV audio signals input to the unit via ARC
are not supported by the unit, use the TV's
speakers.
AV IN -Connection on the rear of the unit
to connect an external audio source.
Adjust volume
Rotate the VOLUME -/+ knob clockwise to
increase volume, or rotate counterclockwise
to decrease volume.
Mute
1. Press MUTE to mute sound output in any
source mode.
'MUTE' will be displayed on the screen.
2. Press MUTE again to resume.
Display and set the clock
1. To display the clock on the LCD display,
press CLOCK on the remote control.
2. To adjust or set the clock, press and hold
CLOCK on the remote control to enter
clock setup mode.
Rotate the VOLUME -/+ knob (or press +/-
on the remote control) to adjust the hour.
Push the VOLUME -/+ knob (or press SEL on
the remote control) to enter minute setting.
Rotate the VOLUME -/+ knob (or press +/-
on the remote control) to adjust the minute.
The time on the clock is set automatically
after a few seconds of inactivity.
18