Electrical Installation - CG AIR MILLENIUM ME-230/50 Instrucciones De Instalación Y De Utilización

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARRANTY
All air blowers are warranted to be free of defects in manufacturing,
material and workmanship for a period of one year from the date of
purchase by the owner/end-user.
Limitations
This warranty does not apply to the bath tub and/or spa but solely to
the components manufactured by CG AIR SYSTÈMES INC.
This warranty shall not apply to the following incorrect operating
procedures, breakage or damages caused by fault, abuse, misuse,
carelessness, misapplication, alteration, modification, improper
maintenance of the unit, as well as act of God, fire, chemical or natural
corrosion or any other casualty.
The owner of the product covered by the present warranty is entirely
responsible for the proper installation of the product in accordance with
the installation manual provided. CG AIR SYSTÈMES INC. neither installs
nor supervises nor contracts for the installation and consequently cannot
be held responsible for the installation.
CG AIR SYSTÈMES INC. is not responsible for any damages or claims
resulting from defects that could have been discovered, repaired or
avoided by inspection and testing prior to installation.
CG AIR SYSTÈMES INC. makes no express warranty , no warranty for
merchantability, no warranty of fitness for particular purposes, neither
any other warranty implied or statutory for its products other than
specified above.
In no event shall CG AIR SYSTÈMES INC. liability exceed the purchase
price of the defective part.
If within the warranty period, any such product shall prove to be
defective, CG AIR SYSTÈMES INC. reserves the right to repair or replace
the defective product with one of equal value.
Commercial limitations
In addition to the above conditions and limitations, if the product is to
be used as a display, the warranty period begins when the product has
been
placed
on
display.
CG AIR SYSTÈMES INC. be responsible for any profit loss due to a
malfunction of the unit. This warranty gives the owner/end-user specific
ME · ME-LL · M0 · MO-LL - AIR BLOWERS
AN INDEPENDENT ELECTRONIC CONTROL, AIR SWITCH OR WALL TIMER MUST BE INSTALLED TO OPERATE THE BLOWER.
ELECTRICAL FEEDER
230V
FUNCTIONS ME · ME-LL · PE
This blower can be operated by an independent electronic control, air switch or wall timer.
One speed or multispeed depending of the control model. Please refer to the instructions of the electronic control, air switch or wall timer for the
operation of your air system.
FUNCTIONS M0 · M0-LL · P0
Your blower is equipped with an integrated air heating element.
This blower can be operated by an independent electronic control, air switch or wall timer.
One speed or multispeed depending of the control model. Please refer to the instructions of the electronic control, air switch or wall timer for the
operation of your air system.
Under
no
circumstances
230V 10A - 240V 10A
GROUND FAULT CIRCUIT INTERRUPTER CLASS A
COMPLY WITH EN 60335-1 CLAUSE 24.3
JUNCTION BOX
BLUE
BLUE / NEUTRAL
BROWN
BROWN / LINE
GREEN
GREEN / GROUND
legal rights and the owner/end-user may have other rights which vary
from one state/province to another.
CG AIR SYSTÈMES INC. reserves the right to discontinue and/or change
models, colors and specifications in design together with replacement
parts without notice and without incurring any obligations.

ELECTRICAL INSTALLATION

1. The electrical installation is subject to inspection and approval by
local authorities. All electrical connections must be made by a
licensed electrician.
2. Before beginning installation make sure that electric power is
disconnected at fuse box.
3. The blower must be located out of reach from the person in the
bathtub and fixed in position with screws.
4. The blower connection is pre-installed. Do not remove the blower
cover, this will void the warranty.
5. Refer to your local electrical code if your distance between the
installation site of the bath unit and the main fuse box is more than
100 feet (30,4 m).
230V
Use the factory pre-installed type SJ wire to connect to junction
box (not provided by the tub manufacturer). Run a separate
230V, 5 5 0Hz, 1 1 0A G.F.I. (Class A protected) electric circuit from the main
fuse box to the junction box. Use a 14 gage three conductor cable
(2 wires plus ground) in connections up to 100 feet (30,4m) from the
main fuse box.
will
BLOWER
3

Publicidad

Tabla de contenido
loading

Tabla de contenido