Garmin HRM-3 Manual De Instrucciones página 3

WARNING: See the Important Safety and Product Information in
the Garmin product box for product warnings and other important
information.
Positioning the Heart Rate Monitor
The heart rate monitor is on standby and ready to
send data. Wear the heart rate monitor directly on
your skin, just below your breastplate. It should be
snug enough to stay in place during your run.
1. Snap one side of the strap to the heart rate
monitor module.
2. Wet both electrodes on the back of the heart
rate monitor strap to create a strong connection
between your chest and the transmitter.
3. Wrap the strap around your chest, and connect
the strap hook to the loop.
note: The Garmin logo should be right-side
up.
Heart Rate Monitor Module (Front)
Hook
Heart Rate Monitor Strap (Back)
4. Turn on the Garmin compatible product, and
bring it within range (3 m) of the heart rate
monitor.
Heart Rate Monitor Instructions
Electrodes
EN
EN–1