Correct Positioning - Brevetti Montolit MOTO FLASH Serie Manual Del Usuario

5 PREPARATION - ELECTRIC POWER SUPPLy
Art. MOTO-300-FL
Art. MOTO-300-FL-115
WARNING!
• Check the integrity of the electric cutter cable.
• Observe the voltage (V) and frequency (Hz) indicated on the electric cutter
• For an extension, use only the IP67 (2P+T) socket and plug and a 3 x 2.5mm2 cable of the H 07 RN-F
type (max length 5 m).
• Check the placement of the power cable: it must not obstruct movement, and should not be subject
to shock or damage.
• Remove the electrical connection in any cases of maintenance or re-
placement of the diamond blade.
• Do not force the motor during processing.
• In the event of electric cutter malfunctions, contact an expert or our Technical Office.
6

CORRECT POSITIONING

1
Art. MOTO-300-FL-PU
Art. MOTO-300-FL-PU-115
2 3
9