Philips HP8350/00 Manual De Instrucciones página 12

EnglisH
1
Problem Possible cause
You have not
switched on the
appliance.
The
appliance overheated
and switched itself
off.
The mains cord is
damaged
The appliance is not
suitable for the
voltage to which it is
connected.
Solution
Set the on/off slide switch to 'I'
to switch on the appliance.
Unplug the appliance and let it
cool down for a few minutes.
Then set the on/off slide switch
to 'I' to switch on the appliance
again.
If the mains cord is damaged,
you must have it replaced by
Philips, a service centre
authorised by Philips or similarly
qualified persons in order to
avoid a hazard.
Make sure that the voltage
indicated on the appliance
corresponds to the local mains
voltage.