Ebode Light Speaker Guia Del Usuario página 10

C) On your LightSpeaker transmitter, find and press the
"PAIRING Button" located on the back of the transmitter. The
status lights on the front of the transmitter will begin to flash.
Note: When these lights are flashing, your transmitter is in
pairing mode; and you have approximately 30 seconds to
complete the next two steps. If you are unable to complete these
steps, simply push the pairing button on the transmitter again.
D) Set the Power switch, located on the back panel of your
subwoofer, to "ON". While the lights are still flashing on the
transmitter, push the "pairing button" on the back panel of your
ebode
Wireless SubWoofer. When the "STATUS" LED turns
from Red to Green the pairing is complete.
10
+
Volume
Status
+
Pairing
FORMS TO
TD. 1993
IFIED TO
+
Volume
Status
+
Pairing
+
+
+
+
+
+