Safety Instructions; Initial Setup - swissflex uni 14_95RF bridge Instrucciones De Uso

Health and comfort
Welcome to the world of Swissflex!
Your Swissflex uni 14_95RF is a Swiss quality product.
If you follow the simple operating and safety inst-
ructions, it will function to your complete satisfac-
tion for many years. In addition to its many other
advantages, your uni 14_95RF offers an undisturbed
sleep environment. All electrical connections bet-
ween the mains plug and the bed are virtually free
of mains voltage (below 0.5 watts) thanks to EcoTec.

Safety instructions

CAUTION! The uni 14_95RF and accessories must
be protected from rain and other moisture to prevent
causing a fire hazard or the risk of electric shock. In
case of spillages on an accessory, the mains cable
must be disconnected from the power outlet and che-
cked by your Swissflex stockist.
When installing the slat base, ensure that the head,
back and foot sections are not obstructed by furni-
ture.
Ensure that the mains supply is disconnected before
any assembly or disassembly work is carried out on
the slat base or the bed frame.
Do not connect any devices to the user socket (31)
that could endanger persons or damage objects
when the socket is turned on by remote control, in
particular electrical tools such as saws, drills and
similar (risk of injury) or portable heating devices
(risk of fire).
Never place the mains cable between the user socket
(31) and the bed in such a way that the cable insulati-
on could be damaged by sharp edges or twists. Never
feed the cable through the adjustment mechanism.
In the case of damage to cables, to the switching
power supply housing or to the user socket (31),
do not adjust the bed to a seated position. Remo-
ve the mains plug from the socket and inform your
stockist.
Never open the user socket housing (31) to which
the cables are connected. If you interfere with any
electrical part of the user socket (31), the guaran-
tee entitlements will no longer apply.
Handle the uni 14_95RF and accessories with care;
do not disassemble or modify them, do not allow
children to play with them and prevent frail indivi-
duals from using the product without supervision.
The product may not be used with a medical device
or be installed in a medical device.
The product may not be used in an environment in
which flammable or explosive gases or vapours (e.g.
anaesthetics) are likely to occur.
The product may not be used to raise and lower
loads.
Only use spare parts that have been produced or
approved by Swissflex. Only these parts guarantee
adequate safety.
GB

Initial setup

Place the batteries into the radio remote control
Remove the cover from the battery compartment
(21) on the back of the radio remote control. Place 3
AAA-batteries (22) into the compartment, paying at-
tention to the +/- markings. Close the compartment
cover again. The maximum range of the radio remote
control is 15 metres.
Teaching-in the remote control (already taught-in in
the factory)
1. Remove the remote control's battery cover on the
back of the device.
2. Insert / check the batteries (3x AAA).
3. Activate the teach-in button (27) on the motor
(press 2x). It flashes after successful activation.
4. A small red button is located above the batteries in
the battery compartment of the device.
5. Press the button; a blue LED will start flashing.
6. Hold the button down until the blue LED is per-
manently illuminated; this means that pairing has
been completed.
Bluetooth
®
1. Download the standard „Swissflex" app from the
relevant platform for Android (Google play) or App-
le iOs (App Store).
2. Install the standard „Swissflex" app onto your
Smartphone / Tablet PC.
3. Check that the motor has a power supply and that
the Bluetooth® adapter is connected to the motor
(23).
4. The Bluetooth® connection LED flashes for about
2 min.
5. Connect your Smartphone / Tablet PC via Blu-
etooth® using the control system, also see the
Smartphone / Tablet PC instruction manual.
6. Enter the PIN (see type plate) if requested, other-
wise the Smartphone / Tablet PC connects auto-
matically.
7. Test the Bluetooth® connection and operation with
the Smartphone / Tablet PC.
8. The Bluetooth® connection LED turns blue as
soon as the Smartphone / Tablet PC is connected
to the control system (Bluetooth® is activated).
Operating instructions
13