ASROCK I/O Plus K8Upgrade-VM800 Manual Del Usario página 17

Idiomas disponibles

2.8.2

2.8.2 Installing Windows XP 64-bit With

Installing Windows XP 64-bit With

Installing Windows XP 64-bit With RAID

Installing Windows XP 64-bit With

2.8.2

Installing Windows XP 64-bit With

Functions

If you want to install Windows XP 64-bit OS on your SATA HDDs with RAID

functions, please follow the below steps.

STEP 1: Make a SATA Driver Diskette.

A. Insert the floppy diskette into your floppy drive.

B. Copy the SATA 64-bit drivers to your floppy diskette.

The SATA 64-bit drivers are located at the following path in the Support CD:

.. \ 64bit SATA Driver

STEP 2: Install Windows XP 64-bit OS on your system.

After making a SATA driver diskette, you can start to install Windows XP 64-

bit on your system.

After the installation of Windows 2000 / Windows XP / Windows XP 64-bit OS,

if you want to manage RAID functions, you are allowed to use both "SATA RAID

BIOS" and "VIA RAID Tool" for RAID configuration. Please refer to the document

in the Support CD, "Guide to SATA Hard Disks Installation and RAID Configuration",

which is located in the folder at the following path: .. \ SATA RAID BIOS and the

document in the support CD, "Guide to VIA RAID Tool", which is located in the

folder at the following path: .. \ VIA RAID Tool

1. Windows 98 / Windows ME does not support RAID functions.

2. If you want to use "VIA RAID Tool" in Windows environment, please install

SATA drivers from the Support CD again so that "VIA RAID Tool" will be

installed to your system as well.

ASRock K8Upgrade-VM800 Motherboard

RAID

1 7

Tabla de Contenido