Pleasant Hearth OFW827T Manual De Instrucciones página 4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 20 minutes
Tools Required for Assembly: Phillips Screwdriver (Not Included) and Wrench (Included)
ASSEMBLY INSTRUCTIONS
1. Turn over the table top (E) and lay it flat on the
floor. Attach the legs (K) to the table top (E)
by inserting M6x10mm bolts (AA) through each
leg and into the pre-installed nuts in the table
top (E). Secure all hardware, but do not tighten
at this time.
Hardware Used
AA M6 x 10mm Bolt
2. Attach two Short Bottom Bars (F) and two
Long Bottom Bars (H) to the Legs (K) by
EE
inserting M6 x 10mm Bolts (AA) through
the ends of the Bars (F,H) and into the pre-
installed nuts in the Legs (K). Secure all
bolts, but do not tighten at this time.
Hardware Used
M6 x 10mm Bolt
AA
EE
1
K
AA
x 8
2
AA
F
H
K
x 16
4
E