Care And Transport; Transport; Storage; Cleaning And Drying - Leica Geosystems DIGIMOUSE Manual De Instrucciones

3. Care and Transport

Transport

Although the DIGIMOUSE is extremely
robust it is prudent to ensure that the
tool is transported in such a way as to
prevent damage.
Never carry the product loose in a road
vehicle, as it can be affected by shock
and vibration. Always carry the product
in its transport container and secure it.
When transporting the product by rail,
air or sea, always use the complete
original Leica Geosystems packaging,
transport container and cardboard box,
or its equivalent, to protect against
shock and vibration.
Before transportation or shipping, you
must remove the batteries - send the
product without batteries.

Storage

Temperature limits
Respect the temperature limits
when storing the equipment,
particularly in summer if the
equipment is inside a vehicle.
Refer to "5. Technical Data" for
information about temperature
limits.
After longer periods of storage or trans-
port carry out a functional check before
using the equipment.
Remove the batteries if the tool is to be
stored for longer periods of time.
Care and Transport
Avoid extreme temperatures that can
cause battery degradation and early
failure of the batteries.

Cleaning and Drying

Use warm water and mild deter-
gent to clean the exterior of the
DIGIMOUSE. Do not use other
cleaning agents as the plastic
parts or labelling could be
affected.
Wipe off splashes of cement, plaster,
etc., as quickly as possible, using water
and a damp cloth or sponge.
Damp products must be
unpacked. Dry the product, the
transport container, the foam
inserts and the accessories at a
temperature not greater than
40°C / 108°F and clean them. Do
not repack until everything is
completely dry.

Repairs

The DIGIMOUSE contains static
sensitive components.
Do not attempt any internal repairs on
your unit. Opening the sensor will void
the warranty.
8
Digimouse-1.0.0en