TruVue TVA2X2 Guia De Instalacion página 3

Installing to Wall
1
Wood Stud Wall
Use wall assembly (K) as a template, make
sure it is level, and mark three mounting holes
along the center lines of the wood studs. Drill
three 3/16" (5 mm) dia. holes 3 1/4" (83 mm)
deep. Level wall assembly (K) and attach to wall
with three long bolts (D) and three washers (H).
Tighten screws firmly. Do not overtighten.
WARNING
Do not over tighten screws, or
Concrete Wall
Level wall assembly (K) and use as a template
to mark three mounting holes. Drill three 3/8"
(10 mm) dia. holes to a minimum depth of 3 1/4"
(83 mm). Insert three anchors (E) into holes and
secure wall assembly (K) to wall with three long
bolts (D) and three washers (H). Tighten screws
firmly. Do not overtighten.
1
Drill holes and insert anchors (E).
2
Place plate (K) over anchors (E). Secure with long bolts (D)
and washers (H).
damage may occur.
concrete
surface
H
K
E
D
K
D
H
K
D
K
E
wall plate
plaster/
dry wall
wall plate
plaster/
dry wall
3 of 16
H
D
WARNING
Long bolts in
center of stud.
STUD
TOP CUTAWAY VIEW
E
H
WARNING
CORRECT
INCORRECT
ISSUED: 09-11-09 SHEET #: 202-9377-1
concrete
concrete