Battery Change - SANUSLIFE ORP Meter Instrucciones De Operación

BATTERY CHANGE:

1. Unscrew the battery compartment cap (1).
2. Insert 2 new batteries (3-Volt lithium batteries
CR2032). Observe the correct polarity!
3. Replace the battery compartment cap (1) and screw
it on tightly.
CONTROL OF THE ORP ELECTRODE MODULE:
To test the functioning of the ORP electrode module (6),
use an ORP test solution (for example, Hanna's HI7021M
240 mV ORP Test Solution).
REPLACEMENT OF THE ORP ELECTRODE MODULE:
1. Unscrew the ORP electrode collar (5).
2. Carefully remove the ORP electrode module (6).
3. Carefully insert the new ORP electrode module (6)
into the ORP meter socket.
4. Replace the ORP electrode collar (5) and screw it
tightly in place.
The SANUSLIFE INTERNATIONAL Support Team will
be happy to answer any further questions you may
have. You will fi nd their contact details on the SANUSLIFE
INTERNATIONAL website at www.sanuslife.com
7