Kenwood Smoothie SB320 Serie Instrucciones página 3

before plugging in
Make sure your electricity supply is
●
the same as the one shown on the
underside of the appliance.
This appliance conforms to EC
●
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
Wash the parts: see 'care &
●
cleaning'.
key
stirrer
cap
lid
goblet
handle
tap assembly - tap lever
tap assembly
sealing ring
blade assembly
off button (O)
pulse button (P)
speed ' ' button
speed ' ' button
dispensing button
to use your smoothie
blender
1 Fit the sealing ring into the blade
assembly.
2 Screw the goblet onto the blade
assembly.
3 Screw the tap assembly onto the
goblet. Check that the dispensing
tap lever is in the off position
4 Place the assembled goblet on the
power unit.
5 Place the liquid ingredients into the
goblet.
This includes fruit (not frozen), fresh
●
yoghurt, milk and fruit juices. These
can be placed into the goblet to the
level marked 'liquids' for either 3 or 6
servings.
- tap body
.
6 Add ice or frozen ingredients to the
goblet.
This includes frozen fruit, frozen
●
yoghurt, ice cream or ice. These can
be added up to the level marked
'frozen ingredients' for the
corresponding number of servings.
7 Push the lid onto the goblet.
8 Either push the cap into the lid or
place the stirrer in the hole.
The stirrer can be used when
●
blending thick mixtures or when
large quantities of frozen foods with
liquids are used.
9 Plug in.
When the smoothie blender is
●
connected to the power supply with
the assembled goblet in place, the
off button will illuminate indicating
that the unit is ready for use. When
a function button is selected the
illumination will change from the off
button to the button selected and
then transfer back to the off button
when switched off.
10 Press speed ' ' and allow to mix for
up to 30 seconds, this is to start the
mixing process, then press speed
' '. Allow the ingredients to blend
until smooth.
Use the stirrer by moving it in an anti
●
clockwise direction.
11 Press the off button to switch off.
12 Place a glass underneath the tap,
press the dispensing button and pull
forward the dispensing tap lever.
Thinner drinks may dispense without
●
having to use the dispensing button.
Use the stirrer to assist when
●
dispensing thick smoothie drinks.
To help dispense the last amount of
●
a thick smoothie drink, add a few
tablespoons of liquid to increase the
flow.
13 When the glass is full, switch off and
release the tap lever. Unplug after
use.
OR
Switch off, remove the goblet and
pour the drink. Unplug after use.
3