Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
mULTipLe BUriAL
2) Situation: 2 victims are carrying pIEpS with
iproBE-Support (pIEpS DSp pro, pIEpS DSp SporT,
pIEpS DSp, pIEpS vECTor or pIEpS freeride). Two
rescuers equipped with the pIEpS safety system
(pIEpS freeride; pIEpS iprobe; pIEpS "Tour" shovel).
at first the rescuer has no initial detection.
• As described above to the point of depth measurement of first victim. (1. situation)
• After successful location (acoustic target located signal by means of PIEPS iProbe),
deactivate the victim's transmitting PIEPS with iProbe Support. Leave the probe in position!
• Automatically, without the need to press any buttons,
the PIEPS Freeride shows the next victim on the display.
• While continuing the search for the second victim,
the second rescuer begins digging with a view to first aid.
• Point location, depth measurement, digging out and recovery of the second victim.
imporTANT!
For the case of multiple burial combined
with transmitting avalanche transceivers without iPROBE
support, training in and use of the search methods developed
and publicized for all single antenna avalanche transceivers
is recommended.
1
Display shows 2 victims
Location of the first victim
2
Depth measurement with iPROBE,
3
located avalanche transceiver
is deactivated
4
Automatic display of the next victim
20
|
08/13
2
1
iproBE
3
4
SpeCiFiCATioNS
TeCHNiCAL dATA
Device designation:
PIEPS FREERIDE
Transmission frequency:
457 kHz (intern. standard frequency)
Power supply:
1 battery, alkaline (AA), LR6, 1,5V
Battery lifetime:
min. 200 Std. Sendebetrieb
Maximum range:
40 metres
Temperature range:
-20°C to +45°C
Weight:
110 g
Dimensions:
(L x W X H) 110 x 58 x 24 mm
Option pack:
iPROBE-Support
WArrANTy CoNdiTioNS
• The device is guaranteed by the manufacturer against defects in material and workmanship
for a period of 2 years from the date of purchase.
• This warranty does not apply to damage caused by incorrect use,
dropping or dismantling of the device by unauthorised persons.
• Any further warranty or liability for consequential damage is expressly excluded.
• Warranty claims should be addressed - enclosing the receipt of purchase –
to the relevant sales outlet.
CerTiFiCATioN:
Warning: Any changes or modifications not expressly approved by the manufacturer,
responsible for compliance, could void the user`s autority to operate this device. Europe: Manufacturer: PIEPS
GmbH, Country of manufacture: Austria; Gerätetype: PIEPS Freeride; The device conforms to the Standard
ETS 300718 WEEE 2002/96/EC; Canada: IC: 7262A-FREE01; USa: FCC ID: REMFREE01, This device
conforms to Paragraph 15 of the FCC regulations. Operation is subject to the following two conditions: 1)
This device may not cause hamful interference, and 2) this device must accept any interference received,
including interference thar may cause undesired operation.
CoNFormiTy:
PIEPS GmbH declares hereby, that the product PIEPS Freeride fulfils all requirements and
regulations of directive 1999/5/EC! The declaration of conformity can be downloaded at the following
source: http://www.pieps.com/certification
mANUFACTUrer, diSTriBUTioN & SerViCeS
pIEpS GmbH, Parkring 4, 8403 Lebring, Austria, e-mail: office@PIEPS.com, www.PIEPS.com
All information
supplied without liability.
Status 08/2013.
08/13
| 21
Publicidad
Tabla de contenido
