Guarantee Conditions - Powerfix Profi heater Manual Del Usario

INSTALLATION
• The ProfiHeater has 63 mm couplings for a glueable connection; glueable adapters to 50 mm are
provided. When using PVC tubing ensure that there is no strain on the connection to the frogs.
• Cut the tube connectors to the required length (or use the frogs) and twist these,
as well as the rubber sealing ring, into the 50 mm adapter by hand. Prevent
any damage by only using the connectors and frogs provided.
• Ensure that the apparatus never runs dry. For this reason, always ensure that the ProfiHeater
is installed horizontally, with the inlet and outlet on top. This ensures that there will
always be water in the apparatus, even if the pump should fall out accidentally.
• Connect the pump to the ProfiHeater and switch the pump on. Check the system
for flow and leakage. In case of leakage on the tube connectors, (never force
them!) use a piece of Teflon tape on the thread of the connection.
• Put the plug into the socket and set the thermostat to the desired temperature.
As soon as the set temperature has been reached, the light will go off.

GUARANTEE CONDITIONS

The product is guaranteed against manufacturing faults for 2 years from the date of purchase. No
guarantee can ever be given on the element burning out and causing a short. Guarantee claims can
only be handled if the product is returned post-paid and providing a valid proof of purchase
is included. Guarantee claims which are caused by installation or operating faults will not be recognised.
Defects arising from lack of maintenance do not fall under the guarantee. Guarantee repairs may
only be carried out by the supplier. The supplier can not be held liable for consequential
damage arising from failure, faulty maintenance or incorrect use of equipment. The guarantee will lapse if extra
facilities are added to the product or if changes are made to the product which are not part of the standard
equipment (for example the use of 'third-party' connectors, cutting off the plug or the drilling of extra holes).
EN
PROFIHEATER MANUAL |
5