Nicols CONTROL 24 Manual De Instrucciones página 17

1) Press MODE SELECT TO litht CHASE
2) Press PAGE to light the desired page led.
3) Mode MASTER B slider to max. position.
4) Move desired scene channel slider to min; then move it up, the program is selected and
executed.
13. RUN A PROGRAM WITH REGULAR BEAT
1) Press AUDIO to extinguish AUDIO LED.
2) Press PARK to light MIX MODE LED.
3) Select to run the scene program.
4) Move the SPEED slider or press TAP SYNC twice to define beat time.
5) Press REC SPEED and the desired FLASH KEY. then the program will be executed with the
beat time.
14. RUN A PROGRAM WITH SPEED SLIDER.
1) Press AUDIO to extinguish AUDIO led.
2) Press PARK to light MIX MODE led.
3) Select to run the scene program.
4) Move SPEED slider to SHOW MODE position.
5) Press REC SPEED, then press the appropriate FLASH.
For example: run the 14th SCENE program with the speed of 1 step per second, then set it to
be controlled by speed slider.
1) Press MODE SELECT to light CHASE
2) Press AUDIO to extinguish its led.
3) Press PARK to light MIX MODE LED.
4) Move all channel sliders to min. Position.
5) Move MASTER B slider to max. position.
6) Press PAGE to light PAGE 2 LED.
7) Move the 14th channel slider to max. Position.,
8) Move SPEED slider until 1.00 appear in display and SPEED LED is lit.
9) Press REC SPEED and FLASH 14, then release both keys; the 14th SCENE program is set to
run 1 step per second.
10) Move SPEED slider to SHOW MODE position. Press REC SPEED and the 14th FLASH,
then the 14thSCENE program is set to be controlled by SPEED slider, move SPEED slider
until 0.10appears on display, the 14th program will run with 10 steps per second.
15. SPEED SETTING
A: SLOWEST SPEED SLIDER SETTING (5 MIN)
1) Press and hold RECORD.
2) Press the 5th FLASH KEY 3 times, then release RECORD.
3) THE 5MIN LED is lit, which means that 5MIN SPEED slider is done.
B: SLOWEST SPEED SLIDER SETTING (10MIN)
1) Press and hold RECORD.
2) Press the 10th FLASH KEY 3times, then release RECORD.
3) The 10 MIN LED is lit, which means that 10MIN SPEED slider is done.
16. MIDI IN SETTING
1) Press and hold RECORD
2) Press 1st FLASH KEY 3times, then release RECORD, when CHI appears on display, you can
select MIDI IN channel from 1st FLASH to 16th FLASH.
3) After you press desired FLASH, the appropriate channel led is lit.
4) Press RECORD and EXIT to withdraw MIDI IN setting.
17. MIDI OUT SETTING
1) Press and hold RECORD
2) Press 2nd FLASH KEY 3 times, then release RECORD, when CHO appears on display, you
can select MIDI IN A channel from 1st FLASH TO 16th FLASH.
3) After you press desired FLASH, the appropriate channel led is lit.
4) Press RECORD and EXIT to withdraw MIDI OUT setting.
SCENES led.
SCENES LED.
17