Logitech QuickCam Pro 9000 Guia Del Usuario página 3


Connect Your Camera to Your Computer

Position Your Camera, Microphone,
and Speakers
Your camera comes with Logitech
RightSound
background noise. The following steps will ensure the best
possible audio performance:
Tip Do not place objects between you and the microphone.
 QuickCam Pro 9000
®
Wait until you are prompted by the software before
connecting your camera to an available USB port on
your computer.
® RightSound ™ Technology.
™ Technology cancels echo and significantly reduces
• Position your camera in the middle of your monitor
for optimal eye contact.
• Position your camera's microphone no more than 3 feet
(1 m) away from you and point it toward you.
• Position your speakers (if used) at least 12 inches
(30 cm) away from your microphone to reduce feedback,
and then angle your speakers away from your microphone.

The Audio Tuning Wizard
The first time that you start QuickCam, you are guided through
the Microphone/Speaker Setup Utility and Audio Tuning Wizard
that lets you do the following:
•
•
•
•
•
In situations with loud and irregular background noise, your voice
can become distorted when using noise suppression. If this occurs,
disable noise suppression in the QuickCam
Tip To change your audio settings in the QuickCam
Select the audio input device (microphone)
and audio output device (speakers).
Enable Acoustic Echo Cancellation (AEC)—recommended.
Enable background suppression—recommended.
Specify microphone input volume and speaker output volume.
Test audio settings.
® software.
click the Settings button, and then click the Audio tab.
QuickCam Pro 9000
®
® software,