Kostal Smart Energy Meter Manual De Instalación página 95

2.
Connect wires to the KOSTAL Smart Energy Meter.
n
With a three-phase mains grid, connect the external wires L1, L2 and
L3 and neutral wire N to the KOSTAL Smart Energy Meter as shown in
the connection diagram.
n
With a single-phase mains grid, connect the external wire L1and
neutral wire N to the KOSTAL Smart Energy Meter as shown in the
connection diagram.
Please note the following:
n
Connection cross-section: 10-25 mm
n
Torque for screw terminals: 2.0 Nm
© 2019 KOSTAL Solar Electric GmbH
2,0 Nm
10-25 mm²
2
10 mm
EN
95