Tabla de contenido
Publicidad
6 Virtual CD-ROM
■ To use Virtual ODD, iso file must be located in the "_iso" folder of device.
■ After finding iso file with direction of ^ / v and < / >, touch "5" to mount
/unmount ISO files.
■ External HDD or CD-ROM may not be recognized according to current mode state.
1. Main Menu
Mode Select
Encryption
Set W-protection
Information
Exit
2. Mode Select (" " is shown in selected mode)
Dual Mode
ODD Mode
HDD Mode
3. Encryption
Enable Encryption
Disable Encryption
4. Set W-Protection
Disable W-P
Eable W-P
5. Information
HDD Temp
HDD Health
HDD Serial
Firmware ver.
Exit
WWW.ZALMAN.COM
Enable/Disable Password, Change password, Reset Encryption
Enable/Disable Write Protection
Check HDD information and firmware version
Exit Menu (backup button can be used to exit)
Both of external HDD and CD-ROM are recognized.
External CD-ROM is recognized.
(Useful when installing OS)
External HDD is recognized.
(Useful when connected to other devices except PC)
Setting Encryption. All the existed data will be lost after
Disable Encryption. All the existed data will be lost after
Data read/write is available
Data Read-only mode, and write protected
Display internal HDD temperature
If display BAD, please backup data and check HDD
Display internal HDD Brand and serial number
Display device firmware version
Setting Device mode
setting
setting
Exit Information
7
Publicidad
Tabla de contenido
