Kenmore 580. 73189 Manual Del Propietário página 7

I_ Pull the bottom window sash down behind the
upper guide until they meet.
NOTE:
• Do not pullthe window sash down so tightlythat the
movement of sliders is restricted.Attach the cabinet
to the window inner sill by drivingthe screws (ITEM F)
throughthe cabinet into window inner sill.
• The cabinet should be installed with a very slight tilt
downward by 1/4" from level.
Window sash
ITEM F FIG. 10
I_ Expand side curtains to fill opening.
Attach each side cudain to the window sash using 4
screws (ITEM G). (FIG. 11)
iTEM G
FIG. 11
_11_Attach the window locking bracket (ITEM L) with
a screw (ITEM G). See FIG. 12.
ITEM G
FIG. 12
in DRAINAGE
A drain hole is provided at the rear of the air
conditioner unit. Select a drain method according to
the following.
• Remove the hole rubber from the base-pan.
• Connect a drain elbow of 9/16" inside diameter to
the drain pipe.
• Connect a drain hose of 9/16" inside diameter to the
drain elbow. (Drain hose is not supplied,)
pE) rain Drain
hose
FIG. 13
_ Slide the air conditioner into the cabinet. (FIG. 14)
CAUTION: For security purposes, reinstall side
screws that were removed in step t.
Screw _
PowerCord _----
Screw
FIG. 14
B Cut the foam stdpl (ITEM K) to the proper length
and insert between the upper window sash and the
lower window sash. (FIG. 15)
FIG, 15
_ Adjust the vent handle before the decorative
front is attached. (FIG. 16)
Straighten the lever, as shown. Pull down part ® to
align with part (_.
FIG. 16
-7-