Software Setup; Software Installation - Belkin F8T030 Guía De Instalación Rápida

P74186ea_F8T030_QIG.qxd 11-04-2003 08:51
Configuring your Network Settings
In order to connect to the Internet, your AP needs an IP address. Typically, these are
provided to the AP by a DHCP server.
The AP is set to obtain an IP address from the Ethernet via DHCP. However, it is
possible for you to pre-configure a fixed IP address into the AP. This can be done
via the web manager using the Bluetooth interface (refer to your User Manual for
more information).

Software Installation

Requirements:
• Windows® 98 SE, Me, 2000, XP
• Computer must be connected to the same Local Area Network as the AP
• Computer must have the appropriate printer driver installed
Page 8

Software Setup

Software Setup
Installing the Software
1. Insert the USB Print Server Utility CD-ROM in the computer you wish to print from.
2. Click on the "Setup.exe" file.
3. You should see the following appear on your screen. Click on the "Next" button to
begin the installation process.