Device Configuration; Power On Your Device; Connecting To The Device; Login - Furrion Access FAN17B83 Manual De Instrucciones

Device Configuration

Power on your Device

Turn on the power connected to the
ceiling mount bracket. The LTE WiFi
Router will be turned on automatically
upon receiving power.
NOTE: You may login to the device
software and disable the auto power on
feature in the configuration software.
The default setting is
If the device is turned off, press and hold
the POWER button on top of the device
for about 4 seconds to turn it on.

Connecting to the Device

Your LTE WiFi Router supports auto-
switch between 4G LTE and External
WiFi. One of the following two methods
can be chosen to link your LTE WiFi
Router with a PC or any other smart
devices which can access to the internet:
WiFi Connection
1. Scan for wireless networks on your
mobile device or laptop. It may take
a few minutes for the network to
appear.
2. Select Local WiFi network with
SSID: FURRIONAP_xxxxxx
Enabled.
Password: FAxxxxxx
The "xxxxxx" in the example above
corresponds to the last 6 characters
of the unique network ID address.
The default password can be found on
the SSID/WPA sticker.
3. Click Join.
LAN Connection
Depending on your RV dealer, you can
connect the Furrion Access through the
assigned Ethernet Socket.

Login

The default IP of this 4G LTE WiFi Router
is 192.168.0.1 with subnet 255.255.255.0.
Make sure the PC attached to this
router is in the same subnet and has
an IP address in the range between
192.168.0.2~ 192.168.0.254.
1. Launch a web browser and enter
192.168.0.1 in the address bar, the
login window will pop up.
http://192.168.0.1
2. Enter the default username: admin
and password: admin.
Username:
Password:
Login
3. Click Login.
Cancel
8