POWER SUPPLY AND ELECTRICAL CONNECTIONS
• In accordance with the rules in force, the power of the heating
appliance must be protected by an RCD with Idm ≤ 30 mA and
an overcurrent protection device, suitable to the characteristics
of the connection line.
• Before using the appliance the first time, check that the voltage
used corresponds to that specified on the appliance.
• This heating device is equipped with Class I electrical resistance
immerged in water and glycol.
• Earth-connection required.
• The connection to the power supply of the towel warmer needs
to be made by using the appropriate plug.
Single-phase power supply 230 V~ ±10% 50 Hz.
• Blue/gray wire: Neutral
• Brown wire: Live
• Green/yellow wire: earthing system
[ 10 - EN ]