Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
NT2 S3
1.5 Detailed View
Front View
1.5.1 LED indication
LED
• Blue = Power on
• Green = Status OK, connection to computer is established
• OFF = Empty drive bay or connection is not yet established
HDD
• Flashing Green = Data access (read/write)
A & B
• Blinking slow (500ms on/off) = Drive failure (error)
• Blinking fast (125ms on/off) = Rebuilding RAID 1 array
Note
In order to determine which type of blinking the LED indicates, stop transferring files to or from
the hard drives. The slow blinking will be slower and the fast blinking will be faster than the
usual flashing of the LED during data access.
1.5.2 RAID switch
DIP Switch
Non-RAID
Switch position: 1 OFF, 2 OFF
RAID 0 - Striping
Switch position: 1 ON, 2 OFF
RAID 1 - Mirroring
Switch position: 1 OFF, 2 ON
Note
Except for the Non-RAID mode, two hard drives are required. After changing the RAID mode,
press the button above the RAID switch to confirm the new setting.
Rear View
Status
RAID Mode
[2]
Introduction
Fan
Confirm RAID mode
RAID switch
Kensington security slot
eSATA port
USB 3.0 port
Power switch
Power receptacle
Changing the RAID mode
requires formatting the
drives.
Make
backup all existing data
first!
sure
to
Publicidad
Tabla de contenido
