Menu Program (Channel Table); Menu Source - LCD MD 32532 Manual Del Usuario

Menu PROGRAM (Channel table)

You will see the channels currently stored in the channel table. The channels will appear with their
channel names if the channel search has been carried out with APS (see below). Channels sought for
manually will appear with their channel number (C – or S -).
The channel memory comprises 100 positions. Activate the cursor in the table with the
button. You will open an additional column, by moving to the right-hand column with the
directional button and pressing
Menu point
Name
Delete
Insert
APS

Menu SOURCE

You will be able to select a different input source in this menu. You will see the currently selected
source in the top line.
The function corresponds to the AV button.
Select the source with
The PROGRAM (CHANNEL) and INSTALL menus will not be available, or the INSTALL menu will have
fewer entries, according to external source selected.
24
again.
Settings
You can change the names of the channels here.
Mark the channel name required and press the red button. Now,
you will be able to change the first letter: Select a symbol with the
directional buttons.
The symbols will appear in the following sequence: A B C [to] Z 0 1
2 [to] 9 ( ) * + , . / [space] –.
Move to the next letter, etc., with the
Press the red button again at the end, in order to store the name.
Select the channel that you want to delete from the list and press
the yellow button.
Press the yellow button again to confirm your choice. The
following channels will move up in the table.
You can move a channel to a different position here.
Select the channel and press the green button. Move the channel
to the required position with
again. The other channels will be moved with it accordingly.
You will carry out the automatic channels search with APS. Press
the blue button. The following message will appear: WARNING! All
pre-stored programs will be deleted.
Press the blue button if you want to terminate the function.
Press the red button or OK, in order to start the search.
The channels table will appear after the end of the search.
. Change to this source, by pressing OK or the
directional button.
and press the green button
E E
N N G G L L I I S S H H
directional
directional button.